design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer tantalum solid capacitors r.cap. code r. voltage code lot. no. polaritymarking(+) r.cap. code polaritymarking(+) lot. no. r. voltage code l w s w1 h s guaranteed at 85 c 85 %rh rohs compliance, halogen free this product is not intended for use in any driving application or any other critical functions that affect passenger s afety. (e.g. powertrain, abs, engine ecu, airbag, etc.) if the intended use of ta/tv series products is for use in other automotive related applications, please cont act our sales tea m. all requests are subject to approval. features surface mount type series : ta size code b2 d2e d3l category temperature range C55 c to +105 c rated voltage range 4 v.dc to 10 v.dc 2.5 v.dc to 10 v.dc category voltage range 4 v.dc to 10 v.dc 2.5 v.dc to 10 v.dc rated capacitance range 47f to 100 f 68 f to 470 f 150 f to 680 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan d ) please see the attached characteristics list surge voltage (v.dc) rated voltage 1.15 endurance +105 c, 2000 h, (b2 size : 1000 h) rated voltage applied capacitance change within 20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current within the initial limit damp heat (steady state) +85 c, 85 % to 90 %, 500 h, rated voltage applied capacitance change within +50 %, ?20 % of the initial value (2r5tae470m(f), 2r5tae330m(f, i), 2r5tae220m(f, 9)) within +40 %, ?20 % of the initial value (except for above model) tan d < 1.5 times of the initial limit dc leakage current within the initial limit series rated voltage (v.dc) rated temp. (c) category voltage (v.dc) category temp. (c) rated capacitance (f) case size (mm) size code specifications standard floor life lwh ripple 1 current (mar.m.s.) esr 2 (m max.) tan d 3 lc 4 (a) part number min. packaging q'ty (pcs) re? ow temp < 260c re? ow temp < 250c ta 2.5 105 2.5 105 220 7.3 4.3 1.8 d2e 3900 9 0.10 110.0 2r5tae220m9 3000 33 105 2.5 105 7.3 4.3 1.8 3100 15 0.10 55.0 2r5tae220mf 3000 105 2.5 105 7.3 4.3 1.8 2400 25 0.10 55.0 2r5tae220m 3000 105 2.5 105 330 7.3 4.3 1.8 3100 15 0.10 82.5 2r5tae330mf 3000 105 2.5 105 7.3 4.3 1.8 2800 18 0.10 82.5 2r5tae330mi 3000 105 2.5 105 7.3 4.3 1.8 2400 25 0.10 82.5 2r5tae330m 3000 105 2.5 105 470 7.3 4.3 1.8 3100 15 0.10 117.5 2r5tae470mf 3000 105 2.5 105 7.3 4.3 1.8 2400 25 0.10 117.5 2r5tae470m 3000 105 2.5 105 680 7.3 4.3 2.8 d3l 3100 15 0.10 170.0 2r5tae680mfl 2500 105 2.5 105 7.3 4.3 2.8 2400 25 0.10 170.0 2r5tae680ml 2500 4 105 4.0 105 100 3.8 2.8 1.9 b2 1100 70 0.08 40.0 4tab100m 2000 105 4.0 105 220 7.3 4.3 1.8 d2e 2800 18 0.10 88.0 4tae220mi 3000 105 4.0 105 7.3 4.3 1.8 2400 25 0.10 88.0 4tae220m 3000 105 4.0 105 470 7.3 4.3 2.8 d3l 2800 18 0.10 188.0 4tae470mil 2500 105 4.0 105 7.3 4.3 2.8 2400 25 0.10 188.0 4tae470ml 2500 6.3 105 6.3 105 47 3.5 2.8 1.9 b2 1100 70 0.08 29.6 6tab47m 2000 105 6.3 105 68 3.5 2.8 1.9 1100 70 0.08 42.8 6tab68m 2000 105 6.3 105 150 7.3 4.3 1.8 d2e 2400 25 0.10 94.5 6tae150m 3000 105 6.3 105 220 7.3 4.3 1.8 2800 18 0.10 138.6 6tae220mi 3000 105 6.3 105 7.3 4.3 1.8 2400 25 0.10 138.6 6tae220m 3000 105 6.3 105 330 7.3 4.3 2.8 d3l 2400 25 0.10 207.9 6tae330ml 2500 10 105 10.0 105 47 3.5 2.8 1.9 b2 1100 70 0.08 47.0 10tab47m 2000 105 10.0 105 68 7.3 4.3 1.8 d2e 2400 25 0.10 68.0 10TAE68M 3000 105 10.0 105 150 7.3 4.3 2.8 d3l 2400 25 0.10 150.0 10tae150ml 2500 105 10.0 105 220 7.3 4.3 2.8 2400 25 0.10 220.0 10tae220ml 2500 1 ripple current (100 khz/ +45 c ), 2 esr (100 khz/+20 c) 3 tan d (120 hz/+20 c) 4 after 5 minutes please refer to each page in this catarog for reflow conditions and taping specifications. size code l0.3 1 w0.2 h0.2 2 s0.2 w10.1 b2 3.5 2.8 1.9 0.8 2.2 d2e 7.3 4.3 1.8 1.3 2.4 d3l 7.3 4.3 2.8 1.3 2.4 r. voltage (v.dc) 2.5 4.0 6.3 10.0 code e g j a r. cap. (f) 47 68 100 code s7 w7 a8 unit : mm externals of ? gure are the reference. 1 0.2 : b2 2 0.1 : b2, d2e b2 size d2e, d3l size b2 size marking dimensions (not to scale) characteristics list speci cations jun. 2018 03 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
